发布时间 : 星期三 文章(最新版)基于单片机的智能照明控制系统毕业设计论文更新完毕开始阅读011eae2d7ed5360cba1aa8114431b90d6d85894a
本科生毕业论文(设计)
题 目 室内智能照明控制系统的研究与设计 学生姓名 李 天 顺 学 号
专业班级 建筑电气与智能化10101班 指导老师 曾 进 辉
I
2013年11月
基于单片机的智能照明控制系统设计
摘 要
随着电子技术的飞速发展，基于单片机的控制系统已广泛应用于工业、农业、电力、电子、智能楼宇等行业，微型计算机作为嵌入式控制系统的主体与核心，代替了传统的控制系统的常规电子线路。楼宇智能化的发展与成熟，也为基于单片机的照明控制系统的普及与应用奠定了坚实的基础。
本文介绍了基于单片机AT89C51的室内灯光控制系统及其原理，提出了有效的节能控制方法。该系统采用了当今比较成熟的传感技术和计算机控制技术，利用多参数来实现对学校教室室内照明的控制。
系统设计包括硬件设计和软件设计两部分。该照明控制系统的主控制器、分控制器分别是以AT89C51和AT89C2051单片机为基础，实现了通信、信号采集、控制与显示等功能。使用光电子镇流器，使光源具备自动调节功能。文中详细地描述了控制电路的设计过程，包括：光信号取样电路、人体信号采集电路、键盘与LED显示电路、RS485通信电路、照明灯控制电路、看门狗电路以及信号处理电路等。对于软件设计主要有主控制器、分控制器的有线通信程序设计以及灯光控制、定时控制、键盘扫描与LED显示等程序设计。
工作时,光信号取样电路采集光照强弱、人体信号采集电路采集室内是否有人、是否为工作时间等信息并将信号送到单片机,单片机根据这些信息通过控制电路对照明设备进行开关操作,从而实现照明控制,以达到节能的目的。
关键词：智能控制，主控制器，分控制器，单片机，定时控制
The Control System for Intelligent Lighting Based on
Single–chip Microcomputer
Author: Li Guozhong Tutor: Sun Man
Abstract
With the rapid development of electronic technology, the system of control based on Single-chip Microcomputer is widely applied in industry, agriculture, electric power, electron, intelligent building and so on. Microcomputer, as the subject and core of the embedded system of control, replaces the traditional system—electronic circuit. At the same time, the development and maturation of the intelligent building for the popularization and application of the control system for lighting based on single-chip microcomputer。
In this paper,the Indoor Lighting Control System Based on AT89C51 and its principle are introduced. Some effective and energy saving control strategys of lighting system are brought forward. The current system uses a relatively mature sensor technology and computer control technology ，using multi-parameter to achieve the school classroom indoor lighting control.
The system includes in two parts. The AT89C51 single-chip microcomputer, and the auxiliary ones are based on AT89c2051. The system can do many jobs, such as wired communication, Signal Acquisition,wireless data transmitting,
controlling and display.Use of electonic ballasts;the light source with automatic adjustment function .The paper describes the designing process of the circuit at length, including: Optical signal sampling circuit, the body signal acquisition circuit, keyboard and LED display circuit, RS485 communication circuit, wireless transmitting circuit, control circuit of lighting, watchdog circuit, etc. The designing of software mainly includes the several programming, such as wired communication, lamplight controlling, timed controlling, keyboard scanning ,LED displaying and signal processing circuit. The wired communication programming function is that through Master-slave communication method based on RS485 the lighting, turning off lighting, regulating brightness of lighting, controlling timed lighting, etc.
Work,the optical signal sampling circuit collecting lighting intensity,indoor