发布时间 : 星期四 文章CimatronE7.1-NC教程更新完毕开始阅读16b71d1aff00bed5b9f31d69
Click on the Tool under the Cutters & Holders tab:
Select the BN20R4 Cutter from the Cutters & Holders dialog.
Click OK to approve the selection.
When you modify a value its color changes to light blue. Change the Tool Trajectory parameters as follows:
Cimatron E 7.1 Getting Started in NC Tutorial 17
Under the Geometry tab, click on the Part Surfaces parameter, Right Click in the Graphics Area and select All Displayed.
Middle Mouse Click to accept the selection.
18 Getting Started in NC Tutorial Cimatron E 7.1
Once a geometry is defined, the Save & Calculate option is enabled. Save & Calculate the procedure.
Tool Motions are displayed in black, Fast Motions in red.
Cimatron E 7.1 Getting Started in NC Tutorial 19
Remaining Stock
After the procedure has been executed the stock that remains can be viewed.
In the NC Process Manager, hide the Rough Parallel Toolpath.
From the NC Toolbar, select the Remaining Stock icon.
Set the options as follows:
20 Getting Started in NC Tutorial Cimatron E 7.1