Atmel ATBTLC1000超低功耗蓝牙SMART (BLE 4.1)解决方案 联系客服

发布时间 : 星期二 文章Atmel ATBTLC1000超低功耗蓝牙SMART (BLE 4.1)解决方案更新完毕开始阅读1791a2c5964bcf84b8d57bbc

Atmel ATBTLC1000超低功耗蓝牙SMART (BLE 4.1)解决

方案

Atmel公司的ATBTLC1000是超低功耗蓝牙SMART (BLE 4.1)系统级芯片(SoC),集成了ARM? Cortex?-M032位MCU,收发器,调制解调器,MAC,PA,TR开关和功率管理单元(PMIC),可用作蓝牙低功耗连接控制器或数据泵,或嵌入了BLE连接和外接存储器的单独应用处理器,主要用在医疗电子如血氧仪,心率仪,血压计,体温计等.本文介绍了ATBTLC1000主要特性,框图,以及ATBTLC1000-MR110CA模块框图,电路图和材料清单以及BTLC1000 Xplained Pro扩展评估板主要特性.

The Atmel? ATBTLC1000 is an ultra-low power Bluetooth? SMART (BLE 4.1) System on a Chip with Integrated MCU, Transceiver, Modem, MAC, PA, TR Switch, and Power Management Unit (PMU). It can be used as a Bluetooth Low Energy link controller or data pump with external host MCU or as a standalone applications processor with embedded BLE connectivity and external memory.

The qualified Bluetooth Smart protocol stack is stored in dedicated ROM. The firmware includes L2CAP service layer protocols, Security Manager, Attribute protocol (ATT), Generic Attribute Profile (GATT), and the Generic Access Profile (GAP). Additionally, application profiles such as Proximity, Thermometer, Heart Rate, Blood Pressure, and many others are supported and included in the protocol stack.

ATBTLC1000主要特性:

Complies with Bluetooth V4.1, ETSI EN 300 328 and EN 300 440 Class 2, FCC CFR47 Part 15 and ARIB STD-T66? 2.4GHz transceiver and modem?

– -95dBm/-93dBm programmable receiver sensitivity – -20 to +3.5dBm programmable TX output power – Integrated T/R switch

– Single wire antenna connection ARM? Cortex?-M0 32-bit processor? – Single wire Debug (SWD) interface – Four-channel DMA controller

– Brownout detector and Power On Reset – Watch Dog Timer

Memory?

– 128kB embedded RAM (96kB available for application) – 128kB embedded ROM Hardware Security Accelerators? – AES-128 – SHA-256 Peripherals?

– 10 digital and one wakeup GPIOs with 96kΩ internal pull-up resistors, one Mixed Signal GPIO

– 2x SPI Master/Slave

– 2x I2C Master/Slave and 1x I2C Slave – 2x UART – 1x SPI Flash

– Three-Axis quadrature decoder

– 4x Pulse Width Modulation (PWM), three General Purpose Timers, and one Wakeup Timer

– 1-channel 11-bit ADC Clock?

– Integrated 26MHz RC oscillator – 26MHz crystal oscillator

– Integrated 2MHz sleep RC oscillator – 32.768kHz RTC crystal oscillator Ultra Low power?

– 1.1μA sleep current (8KB RAM retention and RTC running) – 3.0mA peak TX current (0dBm, 3.6V)

– 4.0mA peak RX current (3.6V, -93dBm sensitivity)

– 9.7μA average advertisement current (three channels, 1s interval) Integrated Power management? – 1.8 to 4.3V battery voltage range – Fully integrated Buck DC/DC converter Bluetooth SIG Certification?

– QD ID Controller (see declaration D028678) – QD ID Host (see declaration D028679)

图1.ATBTLC1000框图

图2.ATBTLC1000电源架构图

图3.ATBTLC1000-MR110CA模块框图