发布时间 : 星期五 文章《材料科学与工程基础》英文影印版习题及思考题及答案更新完毕开始阅读2669f75f4b7302768e9951e79b89680203d86ba1
《材料科学与工程基础》英文习题及思考题及答案
第二章 习题和思考题
Questions and Problems
2.6 Allowed values for the quantum numbers ofelectrons are as follows:
The relationships between n and the shell designationsare noted in Table 2.1. Relative tothe subshells,
l ＝0 corresponds to an s subshell l ＝1 corresponds to a p subshell l ＝2 corresponds to a d subshell l ＝3 corresponds to an f subshell
For the K shell, the four quantum numbersfor each of the two electrons in the 1s state, inthe order of nlmlms , are 100(1/2 ) and 100(-1/2 ).Write the four quantum numbers for allof the electrons intheLandMshells, and notewhich correspond to the s, p, and d subshells.
2.7 Give the electron configurations for the followingions: Fe2+, Fe3+, Cu+, Ba2+,
Br-, andS2-.
2.17 (a) Briefly cite the main differences betweenionic, covalent, and metallic
bonding.
(b) State the Pauli exclusion principle.
2.18 Offer an explanation as to why covalently bonded materials are generally less
dense than ionically or metallically bonded ones.
2.19 Compute the percents ionic character of the interatomic bonds for the following
compounds: TiO2 , ZnTe, CsCl, InSb, and MgCl2 .
2.21 Using Table 2.2, determine the number of covalent bonds that are possible for
atoms of the following elements: germanium, phosphorus, selenium, and chlorine. 2.24 On the basis of the hydrogen bond, explain the anomalous behavior of water
when it freezes. That is, why is there volume expansion upon solidification? 3.1 What is the difference between atomic structure and crystal structure? 3.2 What is the difference between a crystal structure and a crystal system?
3.4 Show for the body-centered cubic crystal structure that the unit cell edge length
a and the atomic radius R are related through a =4R/√3. 3.6 Show that the atomic packing factor for BCC is 0.68. .
3.27* Show that the minimum cation-to-anion radius ratio for a coordination
number of 6 is 0.414. Hint: Use the NaCl crystal structure (Figure 3.5), and assume that anions and cations are just touching along cube edges and across face diagonals.
3.48 Draw an orthorhombic unit cell, and within that cell a [121] direction and a
(210) plane.
3.50 Here are unit cells for two hypothetical metals:
(a) What are the indices for the directions indicated by the two vectors in sketch (a)?
(b) What are the indices for the two planes drawn in
sketch (b)?
3.51* Within a cubic unit cell, sketch the
following directions:
.
3.53 Determine the indices for the directions shown in the following cubic unit cell:
3.57 Determine the Miller indices for the planes shown in the following unit cell:
3.58 Determine the Miller indices for the planes shown in the following unit cell:
3.61* Sketch within a cubic unit cell the following planes:
3.62 Sketch the atomic packing of (a) the (100)
plane for the FCC crystal structure, and (b) the (111) plane for the BCC crystal structure (similar to Figures 3.24b and 3.25b).
3.77 Explain why the properties of polycrystalline materials are most often
isotropic.
5.1 Calculate the fraction of atom sites that are vacant for lead at its melting
temperature of 327_C. Assume an energy for vacancy formation of 0.55 eV/atom.
5.7 If cupric oxide (CuO) is exposed to reducing atmospheres at elevated
temperatures, some of the Cu2_ ions will become Cu_.
(a) Under these conditions, name one crystalline defect that you would expect to form in order to maintain charge neutrality.
(b) How many Cu_ ions are required for the creation of each defect?
5.8 Below, atomic radius, crystal structure, electronegativity, and the most common
valence are tabulated, for several elements; for those that are nonmetals, only atomic radii are indicated.
Which of these elements would you expect to form the following with copper: (a) A substitutional solid solution having complete solubility? (b) A substitutional solid solution of incomplete solubility? (c) An interstitial solid solution?
5.9 For both FCC and BCC crystal structures, there are two different types of
interstitial sites. In each case, one site is larger than the other, which site is
normally occupied by impurity atoms. For FCC, this larger one is located at the center of each edge of the unit cell; it is termed an octahedral interstitial site. On the other hand, with BCC the larger site type is found at 0, __, __ positions—that is, lying on _100_ faces, and situated midway between two unit cell edges on this face and one-quarter of the distance between the other two unit cell edges; it is termed a tetrahedral interstitial site. For both FCC and BCC crystal
structures, compute the radius r of an impurity atom that will just fit into one of these sites in terms of the atomic radius R of the host atom.
5.10 (a) Suppose that Li2O is added as an impurity to CaO. If the Li_ substitutes for
Ca2_, what kind of vacancies would you expect to form? How many of these vacancies are created for every Li_ added?
(b) Suppose that CaCl2 is added as an impurity to CaO. If the Cl_ substitutes for O2_, what kind of vacancies would you expect to form? How many of the vacancies are created for every Cl_ added?
5.28 Copper and platinum both have the FCC crystal structure and Cu forms a
substitutional solid solution for concentrations up to approximately 6 wt% Cu at room temperature. Compute the unit cell edge length for a 95 wt% Pt-5 wt% Cu alloy.
5.29 Cite the relative Burgers vector–dislocation line orientations for edge, screw, and
mixed dislocations.
6.1 Briefly explain the difference between selfdiffusion and interdiffusion. 6.3 (a) Compare interstitial and vacancy atomic mechanisms for diffusion.
(b) Cite two reasons why interstitial diffusion is normally more rapid than vacancy diffusion.
6.4 Briefly explain the concept of steady state as it applies to diffusion. 6.5 (a) Briefly explain the concept of a driving force.
(b) What is the driving force for steadystate diffusion?