发布时间 : 星期二 文章H3C OSPF基本配置更新完毕开始阅读30d7cca2284ac850ad024211
RTA 配置如下：
System View: return to User View with Ctrl+Z. [H3C]sysname RTA
[RTA]interface LoopBack 0
[RTA-LoopBack0]ip address 1.1.1.1 32 [RTA-LoopBack0]quit [RTA]interface Ethernet 0/0
[RTA- Ethernet 0/0]ip address 10.0.0.1 24 [RTA- Ethernet 0/0]quit [RTA]interface Ethernet 0/1
[RTA- Ethernet 0/1]ip address 20.0.0.1 24 [RTA- Ethernet 0/1]quit [RTA]router id 1.1.1.1 [RTA]ospf 1
[RTA-ospf-1]area 0
[RTA-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0 [RTA-ospf-1-area-0.0.0.0]network 10.0.0.0 0.0.0.255 [RTA-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255 RTB 配置如下： [H3C]sysname RTB
[RTB]interface Ethernet 0/0 [RTB- Ethernet 0/0]
[RTB- Ethernet 0/0]ip address 10.0.0.2 24 [RTB- Ethernet 0/0]quit [RTB]interface Ethernet0/1
[RTB- Ethernet0/1]ip address 30.0.0.1 24 [RTB- Ethernet0/11]quit [RTB]interface LoopBack 0
[RTB-LoopBack0]ip address 2.2.2.2 32
[RTB-LoopBack0]quit [RTB]router id 2.2.2.2 [RTB]ospf 1
[RTB-ospf-1]area 0
[RTB-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0 [RTB-ospf-1-area-0.0.0.0]network 10.0.0.0 0.0.0.255 [RTB-ospf-1-area-0.0.0.0]network 30.0.0.0 0.0.0.255 [RTB-ospf-1-area-0.0.0.0]quit
RTC 配置如下： [H3C]sysname RTC
[RTC]interface Ethernet0/0
[RTC- Ethernet0/0]ip address 30.0.0.2 24 [RTC- Ethernet0/0]quit [RTC]interface Ethernet0/1
[RTC- Ethernet0/1]ip address 20.0.0.2 24 [RTC- Ethernet0/1]quit [RTC]interface LoopBack 0 [RTC-LoopBack0]ip add
[RTC-LoopBack0]ip address 3.3.3.3 32 [RTC-LoopBack0]quit [RTC]router id 3.3.3.3 [RTC]ospf 1
[RTC-ospf-1]area 0
[RTC-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0 [RTC-ospf-1-area-0.0.0.0]network 30.0.0.0 0.0.0.255 [RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
查看命令如下：
[RTA]display ip routing-table Routing Tables: Public
Destinations : 11 Routes : 11
Destination/Mask Proto Pre Cost NextHop
1.1.1.1/32 Direct 0 0 127.0.0.1 2.2.2.2/32 OSPF 10 1562 10.0.0.2 3.3.3.3/32 OSPF 10 1562 20.0.0.2 10.0.0.0/24 Direct 0 0 10.0.0.1 10.0.0.1/32 Direct 0 0 127.0.0.1 10.0.0.2/32 Direct 0 0 10.0.0.2 20.0.0.0/24 Direct 0 0 20.0.0.1 20.0.0.1/32 Direct 0 0 127.0.0.1 20.0.0.2/32 Direct 0 0 20.0.0.2 Interface InLoop0 eth0/0 eth0/1 eth0/0 InLoop0 eth0/0 eth0/1 InLoop0 eth0/1
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0 127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
[RTA]display ospf brief
OSPF Process 1 with Router ID 1.1.1.1 OSPF Protocol Information
RouterID: 1.1.1.1 Border Router: Route Tag: 0
Multi-VPN-Instance is not enabled
Applications Supported: MPLS Traffic-Engineering SPF-schedule-interval: 5 0 5000 LSA generation interval: 5 0 5000 LSA arrival interval: 1000
Default ASE parameters: Metric: 1 Tag: 1 Type: 2 Route Preference: 10
ASE Route Preference: 150 SPF Computation Count: 8 RFC 1583 Compatible
Graceful restart interval: 120
Area Count: 1 Nssa Area Count: 0 ExChange/Loading Neighbors: 0
Area: 0.0.0.0 (MPLS TE not enabled) Authtype: None Area flag: Normal SPF Scheduled Count: 8 ExChange/Loading Neighbors: 0
Interface: 1.1.1.1 (LoopBack0)
Cost: 1 State: Loopback Type: PTP MTU: 1536 Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
Interface: 10.0.0.1 (ethernet0/0) --> 10.0.0.2
Cost: 1562 State: P-2-P Type: PTP MTU: 1500 Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
Interface: 20.0.0.1 (ethernet0/1) --> 20.0.0.2
Cost: 1562 State: P-2-P Type: PTP MTU: 1500 Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1