发布时间 : 星期六 文章用CATScript 做的CATIA标题栏和工程图框更新完毕开始阅读374cfd264b35eefdc8d333a5
Case 1
displayFormat = \ Case 7
displayFormat = \ Case 8
displayFormat = \ Case 9
displayFormat = \ Case 10
displayFormat = \ Case 11
displayFormat = \ Case 12
displayFormat = \ Case 13
displayFormat = \ End Select End If
End Sub
Sub CATReference()
'-------------------------------------------------------------------------------
'How to create a reference text
'-------------------------------------------------------------------------------
Set Text = DrwTexts.Add(\ Text.Name = \End Sub
Function CATCheckRef(Mode As Integer) As Integer
'-------------------------------------------------------------------------------
'How to check that the called macro is the right one
'-------------------------------------------------------------------------------
nbTexts = DrwTexts.Count i = 0
notFound = 0
While (notFound = 0 And i Set Text = DrwTexts.Item(i) WholeName = Text.Name leftText = Left(WholeName, 10) If (leftText = \ notFound = 1 refText = \ If (Mode = 1) Then MsgBox \ CATCheckRef = 1 Exit Function ElseIf (Text.Name <> refText) Then MsgBox \Chr(10) + \ CATCheckRef = 1 Exit Function End If End If Wend CATCheckRef = 0 End Function Sub CATFrame() '------------------------------------------------------------------------------- 'How to create the Frame '------------------------------------------------------------------------------- Dim Cst_1 As Double 'Length (in cm) between 2 horinzontal marks Dim Cst_2 As Double 'Length (in cm) between 2 vertical marks Dim Nb_CM_H As Integer 'Number/2 of horizontal centring marks Dim Nb_CM_V As Integer 'Number/2 of vertical centring marks Dim Ruler As Integer 'Ruler length (in cm) CATFrameStandard Nb_CM_H, Nb_CM_V, Ruler, Cst_1, Cst_2 CATFrameBorder End Sub Sub CATFrameStandard(Nb_CM_H As Integer, Nb_CM_V As Integer, Ruler As Integer, Cst_1 As Double, Cst_2 As Double) '------------------------------------------------------------------------------- 'How to compute standard values '------------------------------------------------------------------------------- Cst_1 = 74.2*mm '297, 594, 1189 are multiples of 74.2 Cst_2 = 52.5*mm '210, 420, 841 are multiples of 52.2 If DrwSheet.Orientation = CatPaperPortrait And _ (sheetFormat = CatPaperA0 Or _ sheetFormat = CatPaperA2 Or _ sheetFormat = CatPaperA4) Or _ DrwSheet.Orientation = CatPaperLandscape And _ (sheetFormat = CatPaperA1 Or _ sheetFormat = CatPaperA3) Then Cst_1 = 52.5*mm Cst_2 = 74.2*mm End If Nb_CM_H = CInt(.5 * Width / Cst_1) Nb_CM_V = CInt(.5 * Height / Cst_2) Ruler = CInt((Nb_CM_H - 1) * Cst_1 / 50) * 100 'here is computed the maximum ruler length If RulerLength < Ruler Then Ruler = RulerLength End If End Sub Sub CATFrameBorder() '------------------------------------------------------------------------------- 'How to draw the frame border '------------------------------------------------------------------------------- On Error Resume Next Set Line = Fact.CreateLine(OV, OV , OH, OV ) Line.Name = \ Set Line = Fact.CreateLine(OH, OV , OH, Height - Offset) Line.Name = \ Set Line = Fact.CreateLine(OH, Height - Offset, OV, Height - Offset) Line.Name = \ Set Line = Fact.CreateLine(OV, Height - Offset, OV, OV ) Line.Name = \ If Err.Number <> 0 Then Err.Clear End If On Error Goto 0 End Sub Sub CATTitleBlock() '------------------------------------------------------------------------------- 'How to create the TitleBlock '------------------------------------------------------------------------------- CATTitleBlockFrame 'To draw the geometry CATTitleBlockText 'To fill in the title block If ObjAmount>0 Then CATTitleObjBlock 'To draw the TitleObjBlock and fill in it Else Exit Sub End If End Sub Sub CATTitleObjBlock() '------------------------------------------------------------------------------- 'How to create the TitleObjBlock '------------------------------------------------------------------------------- CATTitleObjBlockFrame 'To draw the geometry CATTitleObjBlockText 'To fill in the title Objblock End Sub Sub CATTitleBlockFrame() '------------------------------------------------------------------------------- 'How to draw the title block geometry '------------------------------------------------------------------------------- ObjAmount= InputBox(\输入“0”或单击“取消” →零件图标题栏； 2.输入零件个数“≥1” →带有明细栏的装配图标题栏\ If( ObjAmount<2 and ObjAmount>101 )then ObjAmount= InputBox(\请输入零件的数目(不大于101不小于2。)：\ End If RowWidth = + 7*mm 'Define rows Rowwidth. const Rows = 7 'Define how many rows . Col(1) = -180*mm Col(2) = -170*mm Col(3) = -168*mm Col(4) = -160*mm