发布时间 : 星期五 文章cimatron it外部指令起动参数（cimatron it外部指令 起动参数）更新完毕开始阅读5e022f0fed3a87c24028915f804d2b160b4e86cb
Cntarc continuously draw tangent arc, please select an arc to keep tangent
The crtansrf curve produces a regular surface on the surface, and remains tangent to its surface
Crvgraph selects a curve to produce curvature and radius of curvature graphs
External program instructions 2 (excerpt)
Crvmap selects a curved surface to produce a surface analysis chart and a color range chart
The dvospl system automatically finds the breakpoint of the smoothing curve (spline) and interrupts it directly
Deldup delete duplicate pixels
The electrod electrode is fabricated to automatically change the die (concave) into an electrode (convex), and a new coordinate system is set up with a closed contour limit
Findintr curves of two different work planes looking for 3D intersection points
Geometry-crvmap.dll rounded detail parameters One, di
1, cimagraf.dll -
2, cnvrtstl.dll -
3, rdsat.dll -
4, rdsla.dll -
5, rdvda.dll -
6, wrtsla.dll -
Two, drafting
1, arowchng.dll -
2, coorlabl.dll -
3, dicirtbl.dll -
4, dms.dll calls with Cim frame
5, drwtyp.dll -
6, freeze.dll -
7 - model.dll - turn the NC and drawing mode back to model building (MODEL)
8, spl2crv.dll -
9, text_db.dll -
10, titlebox.dll -
11, txt_conv.dll -
12, txtbybox.dll -
13, txtoncrv.dll - establish or digital on a curve
14, xpldnote.dll - the explosion blasted into character curve
Three, general
1, delid.dll - delete objects (such as surfaces or curves) by entering the original serial number
A method, direct object system selections will display all the information of the object, including the ID number, and then delete the layer, color and so on;
Method B, press the right button to enter the ID number, such as: 773, and then the system will display all the data, and then delete;
2, editbyid.dll -- with the original input mode number (ID number) to change the attributes of objects, hide or delete; when the system is in color or the calculation of the cutter path, if a IDXXX error occurs, can be used to find out the position of command;
3, entdel.dll -
4, filter.dll -
5, hdl.dll -
6, icondrft.dll -
7, minrad.dll -
8, mverify.dll - displays the number of objects (excluding surfaces) by selection
9, report.dll -
10, rgnlinat.dll -
11, smbypln.dll -
12, units.dll - change the unit, mm to iinch
Four, geometry
1, aplnar.dll - curve into 2D composite curve, then blasted into arc, which can be used for cutting curve
2, appbez.dll - change curves or surfaces to Bezier, divided into two kinds of geometry and parameters
3, cntarc.dll - continue to draw tangent arc, first choose an arc, keep tangent