发布时间 : 星期二 文章涓婃捣甯傚疂灞卞尯2018灞婇珮涓変笂瀛︽湡鏈熸湯鏁欏璐ㄩ噺鐩戞祴鑻辫璇曢 绮惧搧 - 鐧惧害鏂囧簱更新完毕开始阅读6283e1d23069a45177232f60ddccda38366be187
WHAT TO DO:
Relax until you regain your concentration. Practice closing your eyes and breathing in and out slowly, concentrating only on your breath.
Losing a few strands of hair is normal (old hair follicles （囊）are replaced by new ones over time), but stress can disturb that cycle. Significant stress pushes a large number of hair follicles into what’s called a resting stage and then a few months later those hairs fall out, according to MayoClinic.org. Stress can also cause the body’s resistant system to attack your hair follicles, resulting in hair loss.
WHAT TO DO:
Be patient. Once your stress level returns to normal, your hair should start growing back.
60. If you’re stressed, you might have one of the following symptoms EXCEPT that ______.
A. you keep getting headaches
C. your hair is falling out
61. Which of the following is suggested if your brain goes out of focus?
A. Breathing slowly with your eyes closed.
B. Waiting until your brain returns to normal.
D. your brain feels confused B. you always have a cold
C. Spreading lavender oil on your temples.
D. Relaxing and attacking your brain softly.
62. What will happen once we get over our stress according to the passage?
A. Our hair starts falling out and then grows back.
B. Our body’s resistant system attacks your hair follicles C. Our hair starts growing again.
D. A serious headache starts.
(C)
For many in the general public and the engineering community alike, the potential implications of additive manufacturing (AM) have excited the imagination. Popularly known as 3-D printing, the emerging class of technologies has been regarded as both a revolution in
production and an opportunity for dramatic environmental advance.
Yet while the technological capabilities of additive manufacturing processes are studied extensively, a deep understanding of their environmental implications is still lacking.
A new special issue of Yale’s Journal of Industrial Ecology presents the cutting-edge research on this emerging field, providing important insights into its environmental, energy, and health impacts.
Though sometimes described in the public field as similar to an inkjet printer for making objects, additive manufacturing is primarily used as a production process in industry and contains a diverse set of technologies. What they share is the ability to produce products and parts based on digital information by adding layers of materials one after the other rather than, as in traditional manufacturing, removing materials – thus the label “additive.”
“The research in this issue shows that it is too early to label 3-D printing as the path to sustainable manufacturing,” said Reid Lifset, editor-in-chief of the Journal of Industrial
Ecology and co-author of the lead editorial. “We need to know much more about the material footprints, energy consumption in production, process emissions, and especially the linking devices and adjustments between the various stages in the production process.”
Additive manufacturing is sometimes seen as inherently environmentally preferable to traditional manufacturing because of its potential for local production – by consumers, merchants and hobbyists – and because it is thought to allow zero-waste manufacturing. Research in this issue, however, indicates that the environmental performance is very sensitive to the pattern of usage and composition of the machinery and the materials used.
“This special issue demonstrates the capability of industrial ecology to reveal important and often overlooked aspects of new technologies,” said Indy Burke, Dean of the Yale School of Forestry & Environmental Studies. “If we are to realize the environmental potential of 3-D printing, we need to know where the challenges and the advantages lie.”
The special issue contains:
life cycle assessments (LCA) of AM processes and products
investigations of the process energy consumption of AM technologies
studies of operator exposure to printer emissions and dangerous materials
examination of the sustainability benefits derived from the complex figure of parts enabled by the technology
analysis of supply-chain issues arising from the use of the technology
63. The word “additive” in the passage refers to ______.
A. the substance added in small amounts for a special purpose
B. the additional technological capabilities of manufacturing processes C. the digital way to produce products by adding serial layers of materials D. the traditional way to produce products by removing materials
64. The contents listed in the special issue mentioned at the end of this passage focus on
______.
A. the studies of additive manufacturing and sustainability
B. a diverse set of technologies of additive manufacturing
C. the comparison between additive and traditional manufacturing
D. the experiments conducted by Journal of Industrial Ecology
65. Which of the following can be inferred about the researchers’ viewpoint from the
passage?
A. 3-D printing is viewed as a revolution in production.
B. 3-D printing is regarded as a kind of sustainable manufacturing.
C. AM makes a harmful impact on environment, energy, and health.
D. The challenges and advantages of AM need further studies.
66. The passage mainly discusses ______.
A. investigations of the 3-D printing process B.the environmental implications of 3-D printing
C. studies of 3-D printing emissions and materials D.assessments of additive manufacturing processes