Si4430-3中文资料 - 图文 联系客服

发布时间 : 星期五 文章Si4430-3中文资料 - 图文更新完毕开始阅读8c17c8c689eb172ded63b73b

Si4430/31/32 ISM TRANSCEIVER Si4430/31/32 ISM收发器

Features 特点

? 频率范围

?● 240–930 MHz (Si4431/32) 唤醒定时器 ?● 900–960 MHz (Si4430) 自动频率校正(AFC)

? 灵敏度 = –121 dBm 上电复位(POR)

? 输出功率范围 分集式天线和TR开关控制

?● +20 dBm Max (Si4432) 可配置的数据包处理程序 ?● +13 dBm Max (Si4430/31) 报头检测器

? 低功耗 TX(发送)和RX(接收) 64位堆栈

?● 18.5 mA 接收 低电池检测器 ?● 30 mA 在+13 dBm发送时 温度传感器和8位ADC ?● 85 mA 在+20 dBm发送时 –40~+85 °C 温度范围

? 数据速率 = 0.123~256 kbps 集成电压调整器 ? FSK, GFSK和OOK调制 调频功能 ? 电源 = 1.8~3.6 V 片上晶体调谐 ? 超低功耗关机方式 20脚QFN封装 ? 数字RSSI 省料 ?

?Applications

应用

? Remote control 遥控

? Home security & alarm 家庭安防和报警 ? Telemetry 遥测

? Personal data logging 个人数据记录 ? Toy control 玩具控制 ? Tire pressure monitoring 轮胎压力监测 ? Wireless PC peripherals 无线PC外设

? Remote meter reading 远程仪表读数 ? Remote keyless entry 远程无键输入 ? Home automation 家庭自动化 ? Industrial control 工业控制 ? Sensor networks 传感器网络 ? Health monitors 健康监控 ? Tag readers 标签读出器

Description 说明

Silicon Laboratories’ Si4430/31/32 devices are highly integrated, single chip wireless ISM transceivers. The high-performance EZRadioPRO? family includes a complete line of transmitters, receivers, and transceivers allowing the RF system designer to choose the optimal wireless part for their application. The Si4430/31/32’s high level of integration offers reduced BOM cost while simplifying the overall system design. The extremely low receive sensitivity (–121 dBm) coupled with industry leading +20 dBm output power ensures extended range and improved link performance. Built-in antenna diversity and support for frequency hopping can be used to further extend range and enhance performance.

硅实验室公司的Si4430/31/32器件是高度集成的单片无线ISM收发器, 高性能EZRadioPRO? 系列包含整套发送器、接收器和收发器,使得RF系统设计人员可以选择适合他们应用的最佳的无线电器件。Si4430/31/32的高度集成化降低了材料成本同时简化了总体系统设计,很低的接收灵敏度(–121 dBm)与业内领先的+20 dBm输出功率确保了宽阔的通话范围和改进的链路性能。内置分集式天线和跳频支持可以用来进一步拓展范围和提高性能。

The Si4430/31/32 offers advanced radio features including continuous frequency coverage from 240–960 MHz in 156 Hz or 312 Hz steps allowing precise tuning control. Additional system features such as an automatic wake-up timer, low battery detector, 64 byte TX/RX FIFOs, automatic packet handling, and preamble detection reduce overall current consumption and allow the use of lower-cost system MCUs. An integrated temperature sensor, general purpose ADC, poweron-reset (POR), and GPIOs further reduce overall system cost and size.

Si4430/31/32提供了先进的无线电特性包括在240–960 MHz范围的频率覆盖和允许进行精确调谐控制的156 Hz或312 Hz的步幅,其它的系统特性如:自动唤醒定时器、低电池检测器、64字节TX/RX堆栈、自动数据包处理、报头检测减少了总的电流消耗,使得可以采用廉价的系统MCU。一个集成的温度传感器、通用ADC、上电复位(POR)和GPIO(通用输入/输出)进一步减少了总的系统成本和尺度。

The Si4430/31/32’s digital receive architecture features a high-performance ADC and DSP based modem which performs demodulation, filtering, and packet handling for increased flexibility and performance. The direct digital transmit modulation and automatic PA power ramping ensure precise transmit modulation and reduced spectral spreading ensuring compliance with global regulations including FCC, ETSI, ARIB, and 802.15.4d regulations.

Si4430/31/32的数字接收结构具有高性能的ADC和基于DSP的执行解调、滤波、数据包处理的调制解调器,提高了灵活性和性能,直接数字发送调制和自动PA功率梯次确保了精确的发送调制,降低了频谱扩展,确保符合全球的法规包括:FCC, ETSI, ARIB和802.15.4d法规。

An easy-to-use calculator is provided to quickly configure the radio settings, simplifying customer's system design and reducing time to market.

提供了一个易于使用的计算器可以快速进行射频设置,简化了客户的系统设计,减少了投放市场的时间。

Functional Block Diagram 功能方框图

TABLE OF CONTENTS 目录表

Section Page 章节 页数

1. Electrical Specifications 电气规格. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . …. 7 1.1. Definition of Test Conditions 测试条件规定 . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 2. Functional Description 功能描述. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 2.1. Operating Modes 操作方式. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 3. Controller Interface 控制器接口. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3.1. Serial Peripheral Interface (SPI) 串行外设接口(SPI) . . . . . . . . . . . . . . . . . . . . . 18 3.2. Operating Mode Control 操作方式控制. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.3. Interrupts 中断. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.4. System Timing 系统定时. . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 3.5. Frequency Control 频率控制. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4. Modulation Options 调制选择. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 32 4.1. Modulation Type 调制类型. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 4.2. Modulation Data Source 调制数据源. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 5. Internal Functional Blocks 内部功能块. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 5.1. RX LNA 接收低噪声放大器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5.2. RX I-Q Mixer 接收I-Q混频器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5.3. Programmable Gain Amplifier 可编程增益放大器 . . . . . . . . . . . . . . . . . . . . . . . . 37 5.4. ADC 模数转换器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 5.5. Digital Modem 数字调制解调器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 5.6. Synthesizer 合成器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..38 5.7. Power Amplifier 功率放大器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..39 5.8. Crystal Oscillator 晶体振荡器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 5.9. Regulators 调整器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .40 6. Data Handling and Packet Handler 数据处理和数据包处理程序. . . . . . . . . . . . . .41 6.1. RX and TX FIFOs 接收和发送堆栈. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 6.2. Packet Configuration 数据包配置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 6.3. Packet Handler TX Mode 数据包处理程序发送方式 . . . . . . . . . . . . . . . . . . . . . . .43 6.4. Packet Handler RX Mode 数据包处理程序接收方式. . . . . . . . . . . . . . . . . . . . . . . 43 6.5. Data Whitening, Manchester Encoding, and CRC 数据白化、曼彻斯特编码和CRC(循环冗余校验) . . . . . . . . . . . . . 46

6.6. Preamble Detector 报头检测器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 46 6.7. Preamble Length 报头长度. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 47 6.8. Invalid Preamble Detector 无效报头检测器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 6.9. Synchronization Word Configuration 同步字配置. . . . . . . . . . . . . . . . . . . . . . . . .47 6.10. Receive Header Check 接收报头检查. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 6.11. TX Retransmission and Auto TX TX重新发送和自动TX . . . . . . . . . . . . . . . . . 48 7. RX Modem Configuration RX调制解调器配置. . . . . . . . . . . . . . . . . . . . . . . . . . . .49 7.1. Modem Settings for FSK and GFSK 调制解调器的FSK和GFSK设置 . . . . . . . . .49 8. Auxiliary Functions 辅助功能. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 8.1. Smart Reset 智能复位. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .. . . . 50 8.2. Microcontroller Clock 微控制器时钟. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51